DIY Wood Framed Flag

I knew I wanted a giant flag in my dining room, so I made a DIY Wood Framed Flag. I absolutely love how it turned out, and it has the perfect farmhouse charm.  Best of all, it was simple to make, and I’m going to show you how!

This flag is definitely perfect for all patriotic holidays–Memorial Day through the 4th of July, and the rest of summer.  But you can also use it all year round, like I do!

I was making the flag for a very specific place, so I knew exactly how big it could be to fit the space. My flag is 3 feet wide and 4 feet long, painted to be hung vertically as opposed to horizontally.  However, you can make your flag whatever dimensions you want or need them to be, and if you’d rather have it hang the other way, you can do that too! 

P.S. This is the appropriate way to hang a flag when it’s hung vertically!  The stars should be on the left. (Source) 

This isn’t a hard project, but it will take some time.  I’ll be honest, I slaved over getting the stripes just the right size, and I had the math perfectly figured out, but then I accidentally made the blue part too big (too many kids to distract me, ha!).  Since the blue needs to line up exactly with the stripes, I ended up having to change it to 12 stripes to make everything work. I still think it looks pretty authentic!  Anyway…it’s not the math that was wrong, just my focus, so don’t worry. :)


FLAG MEASUREMENTS (for a 4′ x 3′ flag):

 13 stripes– 2.76 inches each (36 inches divided by 13)

navy blue area for stars– 19.4 inches across x 21 inches down

Since the math wasn’t exactly even, I rounded slightly up/down. If you want them exactly even and easy to measure out, and your space is somewhat flexible, then I suggest going backwards–instead of starting with an ending measurement (mine was 36 inches), then start with the stripes instead.  If you want 3 inch stripes, then make your board 39 inches.  Don’t forget, the frame will add inches on both sides, so don’t forget to factor that in.


 I wish I could share my cut file with you, but because the star came from the Silhouette library, it’s against copyright policy. However, I can tell you that the star came from set from the library called “Folk Heart & Star”, and the star I used is on the right. I sized it to 2 inches. (This fits the size of my flag just right, but you’ll probably need to alter the size up or down if you make a different size flag.) If you size one star, then go to Object >Replicate>Fill Page, it fills the whole page with that same star, perfectly lined up.

I sized my page to 12×24, and 60 stars fits just right. I didn’t line them up in flag order on my Silhouette, because the rectangle is bigger than what it can cut. I could have done 2 or 3 lines, cut them out two or three times, and then placed them on there, but I was worried about lining them up exactly right. So, I placed them by hand, which is actually easier for me, and I prefer it for this project. 

I laid the line on the left first, then the one on the right, then the one in the middle (rows of 6). Then I added the two lines of 5, that go in the middle of the lines of 6. It helps me line it up straight. You might want put them in flag lines before cutting, and that’s okay to–you’ll just need to do it a couple of times. Whatever you feel more comfortable with it totally fine! 

*Affiliate links are included below! I’ve included links to the products and colors I used in this project.



-Stain the furring strips (all sides) and MDF board (if desired). Let dry completely.   (I used Minwax Provincial.)

DIY Wood Framed Flag | simply
DIY Wood Framed Flag | simply

-Paint the MDF board white. (I used white latex paint.) It took several coats to completely cover.  Let dry completely.

– Carefully measure the rectangle that will be navy blue/stars, and tape it off with frog tape or painters tape. (I like to measure the stripes at the same time, just marking with a pencil before I tape the rectangle, since the edge of one of the stripes needs to line up exactly with the blue rectangle.)

-Place the 50 vinyl stars in rows–6, 5, 6, 5, 6, 5, 6, 5, 6

DIY Wood Framed Flag | simply

-Paint over the stars with navy blue craft paint.

DIY Wood Framed Flag | simply

-Once the paint is dry, pull off the vinyl stars and painters tape.

DIY Wood Framed Flag | simply

-Tape off the spaces for the stripes, and paint every other stripe red. I planned it so that the stripe laying right next to the long side of the blue rectangle would be white, so I didn’t have to worry about exactly lining up the painters tape and the red paint. Let dry completely.

-Sand, sand, sand!  I wanted mine pretty distressed, so I was pretty assertive with my sander.  I did all the edges, and took the paint all the way down to the stained wood in several places, so it looked quite weathered.  You can sand as little or as much as you like.  Wipe off dust with a lint-free cloth.

-Now you’re ready to frame your flag! Specific instructions for framing can be found in my DIY Farmhouse Sign post, HERE.

You’re done!  You will LOVE your wood framed flag!  Hang it in your home, set it on a mantel, put it up on your porch…it will look darling anywhere you put it.



You might like even more of my DIY & Farmhouse Style projects!

Share and save for later!

Similar Posts